|
New Duplicators
|
IMAGE
MASSTER B25 PC DIAGNOSTIC EQUIPMENT
IMAGE
MASSTER B25 DIAGNOSTIC & DUPLICATION STATION
|
The Image MASSter B25 is a convenient tool for working on,
fixing, designing, evaluating, and testing PC's and their
components. Integration of the
Image MASSter
Solo hard drive duplicator adds an array of hard drive
duplication and diagnostic features to the test station. If you
deal with PC's in any fashion, whether it be Sales, Repair,
Design, or Consulting the Model B-25 will make your life easier
or by far more efficient. It is simply a computer chassis turned
inside out with a few extras thrown in for convenience. All of
the components of a PC are on the outside for easy access. It can
be used for demonstration, evaluation, testing, repair, design,
or for whatever your needs may be at the time. We designed a
utility drawer to install all your known good Hard Drives,
CDROMS, Floppy Disk Drives, Tape Backups, Etc … We also
designed this drawer with easy to use snap-in ball studs for all
your devices. This makes changing any of the devices in the
drawer a SNAP!!!. And no SCREWDRIVER required. Now it only takes
a few seconds to change a drive, just disconnect the data and
power cables and pull out the drive. Then just simply snap in the
next drive and reconnect the cables. It literally only takes a
few seconds. The built-in
Image MASSter Solo hard
drive duplicator will serve all your hard drive duplication and
testing needs. Whether you need to upgrade, back up, or simply
test a hard drive, this popular duplicator has it all.
For those of us who are always looking for a known good
board of some kind and never seem to have one available for
testing, evaluating, etc… we designed in a small drawer on
the left side of the Model B25 to hold up to three spare cards. 1
PCI and 2 ISA Slots. This covers most of your needs for spare
cards.
Some of the other key features of the Image MASSter B25
Portable PC Test Station are: A 230-Watt Power Supply that
supports Both AT & ATX Style Motherboards. A must these days
with all the different kinds of motherboards in circulation. We
also designed in every type of data connector required for use
with the modern day computer. There are 3 IDE Connections on the
outside of the B25 and 4 corresponding IDE connections on the
inside of the utility drawer, 1 High Density and 1 50 Pin
standard SCSI Connector on the outside and one of each on the
inside of the Utility Drawer. In addition we supplied standard
floppy data and power connectors on both the top of the B25 and
inside the utility drawer. And finally we installed 2 serial and
1 parallel port on the side of the B25 for easy access in case
you are not using an ATX style motherboard. Nothing left for the
Imagination. We thought of EVERYTHING!!
|
Image
MASSter P51 DIAGNOSTIC STATION
|
The Image MASSter P51 is a
convenient tool for working on, fixing, designing, evaluating,
and testing PC's and their components. If you deal with PC's in
any fashion, whether it be Sales, Repair, Design, or Consulting
the Model P51 will make your life easier or by far more
efficient. It is simply a computer chassis turned inside out with
a few extras thrown in for convenience. All of the components of
a PC are on the outside for easy access. It can be used for
demonstration, evaluation, testing, repair, design, or for
whatever your needs may be at the time. We designed a utility
drawer to install all your know good Hard Drives, CDROMS, Floppy
Disk Drives, Tape Backups, Etc … We also designed this
drawer with easy to use snap in ball studs for all your devices.
This makes changing any of the devices in the drawer a SNAP!!!.
And no SCREWDRIVER required. Now it only takes a few seconds to
change a drive, just disconnect the data and power cables and
pull out the drive. Then just simply snap in the next drive and
reconnect the cables. It literally only takes a few seconds. Also
for those of us who are always looking for a known good board of
some kind and never seem to have one available for testing,
evaluating, etc… we designed in a small drawer on the left
side of the Model P51 to hold up to three spare cards. 1 PCI and
2 ISA Slots. This covers most of your needs for spare cards. Some
of the other key features of the Model 51 PC Test Station are: A
230-Watt Power Supply that supports Both AT & ATX Style
Motherboards. A must these days with all the different kinds of
motherboards in circulation. We also designed in every type of
data connector required for use with the modern day computer.
There are 3 IDE Connections on the outside of the P51 and 4
corresponding IDE connections on the inside of the utility
drawer, 1 High Density and 1 50 Pin standard SCSI Connector on
the outside and one of each on the inside of the Utility Drawer.
In addition we supplied standard floppy data and power connectors
on both the top of the P51 and inside the utility drawer. And
finally we installed 2 serial and 1 parallel port on the side of
the P51 for easy access in case you are not using an ATX style
motherboard. Nothing left for the Imagination. We thought of
EVERYTHING!!
|
(Click to submit a quote request or call 772-344-7186) |
