|
CAPTURE AN IMAGE
ANYWHERE WITH THIS
ECONOMICAL AND VERSATILE FORENSICS TOOL!
Designed
exclusively for Forensic data acquisition, the ImageMASSter Solo-III Forensics
data imaging tool is a light weight, portable hand-held device that can acquire
data to one or two evidence drives in high speed, exceeding 3GB/Min.
Suspect’s data captured at speeds
exceeding three gigabytes per minute can be hashed and verified to comply with
the highest standards of Computer Forensic Regulations. Using this advanced data
imaging tool on the fly hashing capabilities, the acquired data can be
guaranteed to be an exact replica of the suspect’s data without modification,
re-arrangement or corruption. The suspect’s acquired data can be transferred
using the unit’s direct drive to drive interface or using the unit’s
external Firewire/USB interface to acquire data from a suspect’s unopened
computer. The IMSOLO-III Forensics duplicator supports data acquisition from
IDE, Serial ATA and SCSI hard disk drives, including ATA compatible solid state
devices. The unit’s advanced touch screen user-interface provides ease of use.
IMSolo 3 Forensic can capture data to two hard drives simultaneously without a
speed reduction.
Image MASSter Solo-3 Forensic is a
complete, inclusive High Speed Data Acquisition Tool that integrates all the
latest advanced features in data imaging. It is capable of capturing data from
IDE and laptop drives, Serial ATA and SCSI drives as well as Flash Cards and
with the integrated Link MASSter Option also unopened computers through both
FireWire and USB2 ports. The suspect’s hard drive is write protected and you
can copy data to 2 evidence hard drives simultaneously.
Features of the Image MASSter SOLO 3
Forensics:
.:
MD5 and CRC32 Hashing: Simultaneous MD5 and CRC32 hashing generation
can be performed during the data capture.
.:
Touch Screen User Interface: The unit’s advanced Touch Screen User
Interface and programmed keyboard provides for ease of use.
.:
High Speed Operation: Data acquired with a transfer rate that exceeds
3GB/min.
.:
Built in Write Protection: Suspect’s data is protected with built-in
write protection.
.:
Built in FireWire 1384B and USB 2.0 Interface: Capture data from a
Suspect’s unopened Notebook or PC. Also, safely preview the Suspect’s drive
while connected to the IMSolo III write protected port.
.:
Captures to Two Evidence Drives Simultaneously: Capture data to
two hard drives simultaneously at high speeds, without speed reduction.
.:
Multiple Capture Methods: Acquire data in a Forensic
sector-by-sector format method or using a segmented file format method
(Linux-DD) which allows seizing multiple images to one Evidence drive.
.:
WipeOut: Sanitize drives and erase data at speeds greater than 3GB/min.
.:
Biometric Security: This Option uses fingerprint recognition to ensure
that only qualified and authorized users are allowed to operate the IMSolo III
Forensics unit.
.:
Audit Trail and Logs: Detail operational event log information can be
printed or save to Compact Flash.
.:
Multiple Media Support: Supports data transfer between P-ATA, S-ATA and
SCSI hard disk drives. Also supports imaging data of flash media devices and
Notebook drives.
.:
Upgradable: Software and Firmware upgrades performed using the supplied
Compact Flash Card.
The following Software features come
standard with the IMSolo III Forensics unit:
.: Device Configuration Overlay (DCO)
Option: DCO can be used to hide and protect a portion of the drive’s
area from the operating system and file system. If DCO is detected on a
Suspect’s drive, the IMSolo III Forensics seizure operation will capture the
DCO hidden sectors.
.: Host Protected Area (HPA)
Option: An HPA area may exist on a drive, hiding a certain portion of
the drive’s contents from the operating system and file system. If an
HPA area exists on a Suspect’s drive, the IMSolo III Forensics seizure
operation will detect and capture data from the HPA area.
.: WipeOut DoD Option:
WipeOut was designed to meet the U.S. Department of Defense specification DOD
5220-22M regarding the sanitization of hard disk drive data. Three
iterations are performed to completely erase data and the contents of a hard
disk drive. Each iteration makes two write passes over the entire drive.
.: WipeOut Fast Option:
The Wipeout Fast option provides a quick non-DoD method of sanitizing a drive of
all previously stored data.
.: LinkMASSter Application:
The LinkMASSter application, combined with the unit’s built-in FireWire/USB
interface, provides a fast and effective solution to acquire data from
a Suspect’s un-opened PC or Notebook to an Evidence drive connected on the
IMSolo III unit.
.: Linux-DD Capture Option:
The LinuxDD Capture option captures data as individual “LinuxDD” segmented
files. This option also allows multiple data capture to be performed using
the same Evidence drive.
|
